| 規(guī)格技術參數(shù) |
|
|
（點擊放大） |
| Technical requirements |
1.The cart running and turning both adopt the adjustment with frequency conversion
2.The driver’s room could control the reclaiming, suspension arm belt conveyor and aspersion and lighting and which could be concentrated controlled in the ground central control room.
3.The weight tray and the running mechanism cover shall both be painted with safety mark (chute alternating with yellow and black colors).
4.After the installation of the roller and the carrier roller, they shall rotate flexibly without any lock or touch
5.The balance weight is subject to the debugging and the principle is to ensure the realization of the idle amplitude movement. The automatic arm support pitch-up is at any time prohibited in any position
6.After the installation of the electric equipments, they must accord with the technical performance requirements
7.The lighting equipments shall be configured according to the clients’ practical conditions
8.Plate shall be set at the obvious place for the machine and the size and technical requirements shall meet with the JB8-82 stipulation
9.This machine could work together with reclaimer on the same line without conflict.
10.Means of power supply: the products of our company adopt the safety sliding line, which is safe and energy-saving with long service life and without worries for inspection.
11.The cost of the safety sliding line is not within the range of the whole machine, which shall be otherwise set in another contract. |
Main technical performance table |
Throughput |
Reclaiming |
Coal200-250t/h |
Material proportion |
Coal0.9t/m3 |
ore300-500t/h |
礦石，2.50.9t/m3 |
Reclaiming height |
Upper rail |
8.3m |
Granularity |
≤80 |
Lower rail |
0.4m |
Rail type |
50kg/m |
Bucket wheel reclaiming equipment |
Bucket capacity |
0.19m3 |
Bucket wheel diameter |
2.8m |
Bucket quantity |
10個 |
Rotation speed |
6.5r/min |
Rotation mechanism |
Rotation angle |
±150。 |
Rotation radius |
30M |
Rotation speed |
0-20m/min |
Amplitude mechanism |
Amplitude angel |
Face upward |
+8。 |
Descend |
-10。 |
Suspension arm belt |
Belt speed |
1.25m/s |
Belt width |
800mm |
Running mechanism |
Tread |
7M |
Maximum wheel pressure |
＜230KN |
Running speed |
0-30m/min |
Gauge |
5M |
Electric equipments |
Voltage |
380V |
Maximum power |
87KW |
Frequency |
50Hz |
Means of power supply |
Cable reel |
|
|
Working condition |
Working wind pressure |
Non-working wind pressure |
Operation temperature |
250Pa |
800Pa |
-20。 +50。 |
|
|
